Prolific Usb To Serial 3.3 Mod To Access
Prolific Usb To Serial 3.3 Install A Program
Prolific Usb To Serial 3.3 Serial Monitor To

Details here are emailed when you submit a NEW support ticket.

Even vendors selling their USB to Serial adapters are baffled.

Unfortunately this decision also renders all earlier adapters inoperative.

Unplug the USB-To-Serial adapter and run the PL230364bitInstaller.exe again - following the directions precisely until the correct driver appears.

If it offers a choice to remove the driver, then select to remove the current bad driver.

Unplug the USB-To-Serial adapter and run the PL2303DriverInstaller.exe again, following the directions until correct driver appears in Device Manager.

Prolific Usb To Serial 3.3 Install A Program

If you want to delete it - use the Windows Uninstall a Program or Add or Remove Program feature - however this will also uninstall the driver itself.

YOU MUST NOT use other power supplies if you choose to power the target device with this Adaptor.

USB to TTL converters are essential for prototyping - they provide a direct interface with the target device.

Good product. It wasnt difficult to pull the housing off and re-solder the v wire to the 3.3v contact, then fit it back together, so now I have something that can power my 3.3v device too if I want, while I communicate with it.

The UART RS232 adapter provides both 3.3V 5V pinouts.

Prolific Usb To Serial 3.3 Mod To Access

I needed to make a slight mod to access the 3.3V line to do so.

Very versatile for my DIY project.

Used this with the Uno R3 and the SoftwareSerial library so I could get an extra USB port connection to debug with.

Prolific Usb To Serial 3.3 Serial Monitor To

Whats to say - it works as expected and makes it easy to have a serial monitor to see what my devices are up to.

Works great. Requires a soldering iron to change from 5v to 3.3v.

I needed this part for making a mod to the c64 mini, did the job just fine.

For other c64 mini users considering the same path, remember to open up the casing and resolder the power line from 5v to 3.3v.

It used 28AWG wires and it is 3 feet long which is really nice.

I was able to disassemble the plug to see the chip and the circuit board inside it, And I have to say that it has a good FT232BL chipset.

If you needed a 3V breakout board cable in the future, you can just solder these points together and disconnect the 5V.

I am very happy with this product as it has enabled me to program my Nextion screen and also my RC controller.

I managed to fix my router without needing a serial connection, but the cable arrived as expected and Im sure will help save me some time in the future.

This cable is simple, efficient and with the flying leads can be used for many applications, an excellent product all round.

Works great. Im using Linux Ubuntu so its compatible with it too.

Delivery only took a few days, much better than ordering from overseas Ebay seller.

Used it as terminal interface connector to an Atmel controller with lower speed (19.6kBd).

The USB enclosure is a little bulky compared to moulded FTDI cables but the voltage selection option and price make up for that.

I really appreciate it because in the past, I had to conect a usbRS232 adapter and then use a max232 to get TTL levels.

This module connects to your computer USB port and there are 4 wires which connect with your target device.

NOTE: This product may come in a black or blue variant and are functionally identical.

Please also note that RS232 conversion, in this case, doesnt have the true voltage doublerinverter and as such isnt compatible with some RS232 standardized devices if youre looking for a converter that does please look here.

Prolific Usb To Serial Driver 3.3